Custom Audio Electronics KM216H, Справочник по командам

Страница: 6 / 48

STATUS COMMANDS
$10 $04 DLE EOT Real-time status transmission
$1B $76 ESC v Transmit paper sensor status
$1D $72 GS r Transmit status
$1D $E0 GS { } Enable / disable automatic FULL STATUS back
$1D $E1 GS { } Reading of length paper (cm) available before virtual paper end
$1D $E2 GS { } Reading number of cuts performed from the printer
$1D $E3 GS { } Reading of length (cm) of printed paper
$1D $E4 GS { } Reading number of retracting
$1D $E5 GS { } Reading number of power up
BARCODE COMMANDS
$1D $48 GS H Select printing position of HRI characters
$1D $66 GS f Select font for HRI characters
$1D $68 GS h Select barcode height
$1D $6B GS k Print barcode
$1D $77 GS w Select barcode width
MACRO FUNCTION COMMANDS
$1D $3A GS : Start/end of macro de fi nition
$1D $5E GS ^ Execute macro
MECHANISM CONTROL COMMANDS
$1B $69 ESC i Total cut
$1D $56 GS V Select cut mode
MISCELLANEOUS COMMANDS
$1B $40 ESC @ Initialize printer
$1B $FA ESC { } Print graphic
$1B $FB ESC { } Transmit graphic page to communication port
$1B $FC ESC { } Transfer fl ash bank into RAM
$1B $FD ESC { } Receive graphic page from communication port
$1B $FE ESC { } Transfer RAM into fl ash bank
$1D $49 GS I Transmit printer ID
$1D $50 GS P Set horizontal and vertical motion units
$1D $D0 GS { } Set horizontal and vertical motion units
$1D $E6 GS { } Virtual paper end limit
TICKET MANAGEMENT COMMANDS
$1D $7C GS { } Set printing density
$1D $E7 GS { } Set notch distance
$1D $F0 GS { } Set printing speed
$1D $F6 GS { } Align the print head with the notch
$1D $F8 GS { } Align the autocutter with the notch
EJECTOR COMMANDS
$1D $65 GS e Ejector commands
ESC/POS™ Emulation
6
Command Reference