Custom Audio Electronics KM216H, Справочник по командам

Страница: 24 / 48

$1B $C1
Printers: KM216H, KPM216H
[Name]
Set/cancel cpi mode
[Format] ASCII ESC { } n
Hex 1B C1 n
Decimal 27 193 n
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description] Sets cpi mode based on the following values of n:
n
FUNCTION
200Dpi 300Dpi
0, 48
Font A = 11 cpi
Font B = 15 cpi
Font A = 16 cpi
Font B = 23 cpi
1, 49
Font A = 15 cpi
Font B = 20 cpi
Font A = 23 cpi
Font B = 30 cpi
[Default] n = 0
[Reference] $1B $21
[Example]
$1B $FA
Printers: KM216H, KPM216H
[Name]
Print graphic
[Format] ASCII ESC { } n xH xL yH yL
Hex 1B FA n xH xL yH yL
Decimal 27 250 n xH xL yH yL
[Range] 0 ≤ n ≤ 1
0 ≤ xH, xL, yH, yL ≤ 255
[Description] Prints graphic logo from fl ash or current graphic page located in ram. n selects the graphic
source as follows:
n FUNCTION
0 Print graphic page from ram (used at the moment)
1 Print logo 1 from fl ash
The maximum printable vertical dimension
dhmax
is:
Modello 200 Dpi 327 linee
Modello 300 Dpi 221 linee
xL + xH × 256 speci fi es the starting dotline (1 ÷
dhmax
).
yL + yH × 256 speci fi es the number of lines to print.
[Notes] • If (xL + (xH × 256)) >
dhmax
the printer does not execute the command.
• If ( xL + ( xH × 256 ) + yL +( yH × 256 ))>
dhmax
the printer prints only
dhmax
- xL + (
xH × 256 ) +1 dotline.
• After the print of the logo from RAM (n= 0 ), the graphic page is deleted. If the user
wants to print again or save the logo into the
fl ash, the user must retransmit or reload it
with the command $1B $33.
• To print a text string before the logo, send a $0A, because the logo printing buffer and
the characters buffer is the same.
• If don’t modify the logo stored into fl ash bank, use this command with n = 1.
ESC/POS™ Emulation
24
Command Reference