Custom Audio Electronics KM216H, Справочник по командам

Страница: 27 / 48

$1D $21
Printers: KM216H, KPM216H
[Name]
Select character size
[Format] ASCII GS ! n
Hex 1D 21 n
Decimal 29 33 n
[Range] 0 ≤ n ≤ 7, 16 ≤ n ≤ 23, 32 ≤ n ≤ 39,
48 ≤ n ≤ 55, 64 ≤ n ≤ 71, 80 ≤ n ≤ 87,
96 ≤ n ≤ 103, 112 ≤ n ≤ 119
[Description] Selects character height and width, as follows:
• Bits 0 to 3: to select character height (see table 2).
• Bits 4 to 7: to select character width (see table 1).
Table 1 Select character width Table 2 Select character height
HEX Decimal WIDTH HEX Decimal HEIGHT
00 0 1 (normal) 00 0 1 (normal)
10 16 2 (width = 2x) 01 1 2 (height = 2x)
20 32 3 (width = 3x) 02 2 3 (height = 3x)
30 48 4 (width = 4x) 03 3 4 (height = 4x)
40 64 5 (width = 5x) 04 4 5 (height = 5x)
50 80 6 (width = 6x) 05 5 6 (height = 6x)
60 96 7 (width = 7x) 06 6 7 (height = 7x)
70 112 8 (width = 8x) 07 7 8 (height = 8x)
[Notes] • This command is effective for all characters (except HRI characters).
• If
n
falls outside the de fi ned range, this command is ignored.
• Characters enlarged to different heights on the same line are aligned at the baseline or
topline.
• $1B $21 can also be used to select character size. However, the setting of the last
received command is the effective one.
[Default] n = 0
[Reference] $1B $21
[Example]
$1D $3A
Printers: KM216H, KPM216H
[Name]
Start/end macro defi nition
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro de fi nition.
[Notes] • Macro de fi nition starts when this command is received during normal operation.
• When $1D $5E is received during macro de fi nition, the printer ends macro de fi nition
and clears all de fi nitions.
• Macros are not de fi ned when power is turned on to the machine.
• Macro content is not cancelled by the $1B $40 command. Therefore, $1B $40 may be
included in the content of macro de
fi nitions.
• If the printer receives $1D $3A a second time after previously receiving $1D $3A, the
printer remains in macro unde
fi ned status.
• The contents of the macro can be de fi ned up to 1024 bytes. If the macro de fi nition
exceeds 1024 bytes, excess data is not stored.
ESC/POS™ Emulation
Command Reference
27