Important Notice To Purchaser
Before installing this heater, the user should determine the suitability of the heater and its
intended use. Cürv360 Limited shall not be liable for any direct, indirect special, incidental or
consequential damages resulting from improper product use.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
IMPORTANT!
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR
FUTURE REFERENCE
Failure to observe these instructions will invalidate the warranty.
Do not disassemble the Cürv heater or this will invalidate the warranty.
Warning
To reduce the risk of fire, electric shock or injury:
1.
This heater must be disconnected from the power during installation
or when replacing.
2.
Check each heater, plug and cable are free from damage before
installation.
3.
In order to avoid overheating and potential fire hazard, do not cover the
heater with insulating material or similar material under any circumstances.
4.
Do not touch the heater when in use. Cürv infrared heaters have a surface
temperature of around 85°c and prolonged contact with the heater will cause burns
and injury.
5.
Do not operate the heater if the cable or plug is damaged or after the heater
malfunctions, or if it has been dropped or damaged.
6.
For Cürv Towel Rails and Mirrors handle with care and avoid damaging the glass. Do not
use the heater if the glass is damaged; disconnect the heater and do not use again.
7.
This heater must only be used for internal use within a property.
8.
Children should be kept away and should not be left unsupervised around the heater.
9.
Ensure the heater is isolated at the mains when cleaning.
10. Important: Cürv infrared heaters are designed for use with an AC voltage
between 220-240 volts, 50 Hz AC
11. Important: the heater must be mounted on a non-flammable surface.
Safety Precautions
