background image

DuraCOR 310 

 

Chapter 7  Troubleshooting    

 

 

 

MNL-0666-01  Rev A3   

ECO-5479 

Effective:  26 Apr 18   

Page 45 of 51 

 

Chapter 7  Troubleshooting 

Product Identification 

The product is labeled with the Parvus P/N and serial number.  Please refer to this information when 
communicating with Technical Support. 

Technical Assistance 

If you have a technical question or if you cannot isolate a problem with your product, please call or e-mail 
the Parvus Technical Support team:  

Email 

[email protected]  

 

Phone 

1.801.433.6322 

Fax 

1.801.483.1523 

 

Returning for Service 

Before returning any Parvus product, please fill out a Return Material Authorization (RMA) request form 
available for download from the following website under the support section: 

www.curtisswrightds.com

   

Email this form to the Technical Support email address (

[email protected]

) to receive 

authorization for shipment. An RMA number will be emailed back to you as soon as possible. 

 

 

Note:  You must have the RMA number in order to return any product for any reason. 

 
 

 

Caution:  

Any product returned to Parvus improperly packed will immediately void the warranty for that particular 
product. 

 

 

 

Содержание DuraCOR 310




















































Отзывы: