DuraCOR 310
Chapter 2 Operational Description
Page 18 of 51
MNL-0666-01 Rev A3
ECO-5479
Effective: 26 Apr 18
Lift cage
Place the microSD card into the socket
Lower the cage and slide it away from the board edge to lock it in place. There will be an audible
click when cage is secured.
Replace the bottom cover and secure the screws to 34.4 in-oz., using thread-locker (i.e. Loctite
222).
Removal
Power off system and remove the bottom cover
Slide the microSD cage cover toward the board edge (Figure 9)
Lift cage
Remove the microSD card
Lower the cage and slide it away from the board edge to lock it in place. There will be an audible
click when cage is secured.
Replace the bottom cover and secure the screws to 34.4 in-oz. [0.24 Nm], using thread-locker
(i.e. Loctite 222)