Curtis GEMSS10A1000, Руководство пользователя

Страница: 17 / 41

Programming Options (cont.)
Brew Button Programming Menu
8IFOZPVmSTUFOUFSUIF#SFX#VUUPO1SPHSBNNJOHNFOVZPVXJMMCFBTLFEUPTFMFDU QSFTTB#3&8CVUUPOUP
DIBOHFUIFTFUUJOHTGPS5PQSPHSBNNPSFUIBOPOF#3&8CVUUPOmOJTIQSPHSBNNJOHUIFmSTUUIFOQSFTT
Ź until
Exit appears on the display. Press
~
to exit, then re-enter the Brew Button Program to program the next one.
Brew by Volume - BEKVTUTUIFWPMVNFCSFXFE UIFGBDUPSZEFGBVMUTBSF-"3(&P[œP[ MEDIUM
P[œP[ 4."--P[œP[8JUIBTBUFMMJUFJOQMBDFQSFTTUIF#3&8CVUUPOUIBUJTJMMVNJOBUFE8IFOUIF
desired volume is reached, press the same BREW button again to stop the brew cycle and set the volume.
Brew by Time - adjusts the amount of coffee brewed by time rather than by volume (the factory defaults are
LARGE 5min-25sec., MEDIUM 3min-32sec., SMALL 1min-52sec). Once accessed, press
Ż
or
Ź
until the
OVNCFSPGNJOVUFTJTnBTIJOH5IFOQSFTT
~ repeatedly
to change the number value. Press
Ż
or
Ź
until the
OVNCFSPGTFDPOETJTnBTIJOH5IFOQSFTT
~ repeatedly
to change the number value. Press
Ż
or
Ź
until “ex”
JTnBTIJOHUIFOQSFTT
~
to exit.
Pre-Infusion - sets the brewer Pre-Infusion time (Pulse Brew must be off to access, the factory default is
%JTBCMFE1SF*OGVTJPOJODSFBTFTDPOUSPMPGDPGGFFDMBSJUZBOEFYUSBDUJPO8IFOUVSOFEPOUIFSBOHFJTUP
seconds. Once accessed, press Ż or Ź to choose the desired setting, then, press
~
to exit. To turn off pulse
CSFXNPEFDIPPTFGPSUIFUJNF
When Pre-infusion is ON, Pulse Brew disappears from the list of menu items.
Pulse Brew - selects the pulse brew pattern (Pre-Infusion must be off to access, the factory default is C). The
QVMTFCSFXQBUUFSOTFMFDUFEiUVOFTwPSDIBOHFTUIFnBWPSPGUIFDPGGFF0ODFBDDFTTFEQSFTT Ż or Ź to
choose the desired setting. Then, press
~
to exit.
8IFO1VMTF#SFXJTPO$PME#SFX-PDLJTTFUXJUIJO'BOE$PME#SFX-PDLBOE1SF*OGVTPO
disappear from the list of program selections.
Pulse Brew Guidelines
• Filter pack type coffees typically extract better with the A and B pulse setting.
• Decaffeinated coffees typically extract better with the B pulse setting.
• High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
TFUUJOHTNBZCFVTFEUPTVJUZPVSUBTUFQSPmMF
• Settings D and E are manual pulse counts.
By-Pass - IFMQTDPOUSPMFYUSBDUJPOXJUIMBSHFSCSFXT UIFGBDUPSZEFGBVMUTBSF-"3(&.&%*6.
4."--0GG*USFEVDFTDPOUBDUUJNFUPBWPJEFYUSBDUJPOPGVOEFTJSBCMFCJUUFSBOEIBSTInBWPSDPNQPVOET5IF
SBOHFJT0''UP0ODFBDDFTTFEQSFTT
Ż or Ź to choose the desired setting, then, press
~
to exit.
PROGRAMMING GUIDE PG2
8$130(3"..*/((6*%&ø &
Setting Description
A Toward the beginning of brew cycle: 4 cycles of 10 seconds on and 10 seconds off, then on until end of brew cycle.
B 1 minute on, then 4 cycles of 10 seconds off and 10 seconds on, then on until end of brew cycle.
C Starts at beginning of brew cycle. 5 cycles of 25 seconds on and 20 seconds off, then on until end of brew cycle.
D
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 20. Pulse on time and off
time are both adjustable from 5 to 150 seconds.
E
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 8. Pulse on time and off
time are both adjustable from 1 to 150 seconds.