OPERATING INSTRUCTIONS
OI11
Brewing Instructions
The G4 ThermoPro Brewer is factory preset for optimal performance.
(5101&3"5*/(*/4536$5*0/4ø
041519A
2 Center an empty dispenser
under the brew basket.
3
*OTFSUBDMFBOQBQFSmMUFS
into the brew basket. Fill with
the proper amount of ground
coffee. Level the coffee in the
mMUFS
4
4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
5
)PMEZPVSmOHFSPOUIF
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
mOHFS#SFXJOHXJMMCFHJO
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the
PROGRAMMING GUIDE
section.
1 The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display. If
the brewer is connected to an
inter-lock grinder, the grinder
should be on. When inter-lock
connection is made, grind
coffee at this time.
WARNING
- TO AVOID SCALDING, AVOID SPLASHING.
Keep body parts clear of the brewer during
CSFXJOH%POPUSFNPWFUIFCSFXCBTLFUXIJMFi#SFXJOHwBQQFBSTPOUIFEJTQMBZ
6 If a keypad appears on
the display, the brew code
feature is enabled (default
is off).
Brewing will start
immediately after you enter
the brew code
. See the
PROGRAMMING GUIDE
to
set up/disable the brew code.
Back of brewer