background image

17

Important

Remember to always read and follow the formulation manufacturer's instructions

on the proper use of the formulation you are attempting to spray.  To prevent over applying the 

formulation, do not spray when the vehicle is stationary. 

Optional Radar Syncroflow System

When equipped, the Curtis Radar Syncroflow

TM

 System allows the dispensing of formulation to  be 

either a constant flow (

A

Manual

@

) regardless of vehicle speed, or a variable flow (

A

Syncroflow

@

) which 

is correlated to vary proportionately with vehicle speeds from 4 to 20 m.p.h. 

Either system can be actuated by a toggle switch located at the back of the pump enclosure. 

When the syncroflow system is actuated, electronic pulses are fed from the Radar to the formulation 
pump. As the vehicle moves faster or slower these pulses increase or decrease in frequency which in 
turn cause the formulation output pump to increase or decrease the fluid flow. A digital readout of the 
pump and vehicle speed are displayed at the remote control box.

The Syncroflow System can be used by itself or with Dyna-Trax to give you full recording and 
monitoring capabilities. 

Dyna-Trax GPS

- Refer to the separate Dyna-Trax Instruction Manual prior to operating your 

machine.

When equipped with the Dyna-Trax GPS System, your machine has the ability to perform the 
following tasks: 

¾

Vary pump output with vehicle speed (When used with Syncroflow)

¾

Monitor and record spray route, complete with Spray ON/OFF locations.

¾

Store large amounts of recorded data that can be easily loaded onto your PC.

¾

View and Print reports showing spray activity, volume, area, operator, speed, etc…

¾

Import the recorded data into standard mapping software for seeing data in color on the actual
streets in your area.  All maps can be modified and printed.

¾

Monitor your machine as it moves down the street in "Real-Time" from anywhere in the world via
the internet.  The "Real-Time" feature is sold separately from the basic Dyna-Trax GPS unit.

¾

Merge reports into Spreadsheets, word processing documents, etc..

¾

Send recorded files by e-mail to other offices or to anyone in the world who has mapping software
installed on their PC.

Refer to the 

Dyna-Trax Operation Manual

 for details on installation and operation.

Содержание DYNA-FOG DYNA-JET L30 2 Series




















































Отзывы: