Curtis Acuity 1030, Руководство пользователя

Страница: 31 / 31

28
Curtis 1030 Acuity Manual,
Rev. C
9 — SPECIFICATIONS
SPECIFICATIONS
The specifications for the Curtis Model 1030 Acuity are presented in Table 4.
CAN TERMINATION CAN
MODEL NUMBER VOLTAGE RANGE RESISTOR 120Ω CONNECTOR
1030-304 24 – 48 VDC no Bullet
1030-310 24 – 48 VDC no Deutsch
1030-306 24 – 48 VDC yes Deutsch
1030-308 24 – 48 VDC yes Bullet
1030-305 72 –144 VDC no Bullet
1030-311 72 –144 VDC no Deutsch
1030-307 72 –144 VDC yes Deutsch
1030-309 72 –144 VDC yes Bullet
Table 4 Specifications: 1030 Acuity
Electrical
Operating voltage range 24 – 48 VDC; 72 –144 VDC
Electrical isolation
500 VAC, per UL 583
Transients IEC 6100-4-4, test level 2
Reverse voltage Acuity will not be damaged if connected to the battery
protection with inverted polarity.
Short circuit All inputs and outputs (except CANbus) shall withstand
protection continous short circuit to B– or B+.
CANbus Isolation Eliminates ground loops that can cause component
damage as well as data errors due to differences in ground
potentials among the nodes on the CANbus.
Environmental
Operating/storage
–
30°C to 55°C
temperature range
Humidity
100% condensing, per IEC 60068-2-30, Db
Protection IP67, per EN60529
Vibration IEC 60068-2-6, Fc
Shock IEC 60068-2-29, Eb
Chemical resistance Immune to the effects of contact with battery electrolyte,
hydraulic fluid, water, baking soda.
EMC
Emission
EN55022 Class B (component test): EN12895 (vehicle test)
Immunity EN61000-4-3 (component test): EN12895 (vehicle test)
ESD EN61000-4-2 (component test): EN12895 (vehicle test)
Regulatory Approvals
UL (pending)
Recognition or component listing (UL 583)
9