CAB INSTALLATION
14 of 34
STEP 2: (CAB INSTALLATION)
2.7
Install the back of the cab to R.O.P.S mounts per
Figure 2.7.
Hardware Used
Qty
5/16
-
18X1
-
3/4
”
Flange Hex Screw
4
5/16
-
18 Flange Lock Nut
4
Tools required
1/2”
wrench and socket
2.8
Install the front of the cab to front mounts per
Figure 2.8.
Hardware Used
Qty
5/16
-
18X1
”
Flange Hex Screw
4
5/16
-
18 Flange Lock Nut
4
Tools required
1/2”
wrench and socket
2.9
Fully tighten front mount hardware going into the
vehicle
’
s side frame. Torque to 110 ft
-
lbs. (150
Nm). See Figure 2.9.
Tools required
18mm wrench
18mm socket
Torque Wrench
2.10
Install one of the supplied brushes to the
underside of the right cab floorboard.
Next, install a second brush along with the
supplied floorboard insert on the inboard side of
the deck lift lever. See Figure 2.10.
Hardware Used
Qty
#8
-
32 X5/8
”
Pan Head Screw
6
#8
-
32 Flange Lock Nut
6
Tools required
11/32”
wrench or socket
#2 Phillips bit or screw driver
Fig. 2.7 (Install Back of Cab Screws)
Fig. 2.8 (Install Front Mount Screws)
Install
Fig. 2.9 (Tighten Vehicle Frame Bolts, Left)
Torque nuts to
110 ft
-
lbs. (150 Nm)
Fig. 2.10 (Install Brushes and Insert, Right)
Install
Right Brush
Insert
Left Brush
