NEED ASSISTANCE?
•
844.278.4357
•
RA
•
PAGE 4
Step 8
Remove the fuse from the wiring
harness before installing.
Once the fuse is removed, take that section
of the wiring harness and attach it to the
battery. Route the opposite end of the harness
through the firewall into the cab of the vehicle.
Zip-tie the wiring harness in place
once it is in the desired location.
Step 9
Remove the front and rear door trim
panels on both sides of the vehicle.
Note:
Remove any other vehicle components
that could interfere with the wiring harness.
