ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2074113-INS-RA
•
PAGE 2
Step 1
Starting on the driver side, locate
the four mounting points along the
rocker panel of the vehicle.
Step 2
Lift the Rocker Step into position and
align the brackets on the Rocker Step
with the mounting points on the vehicle.
Secure all mounting points using two
M8 hex bolts, lock washers and flat washers.
Tighten all hardware to the
recommended torque specifications
listed in the table on the first page.
Step 3
Repeat steps 1 through 2 on the
passenger side of the vehicle.
Congratulations on the installation
of your new ARIES Rocker Steps.
With the rocker steps installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on
the first page of this instruction manual.
