Currys CRC4N110, Инструкция по эксплуатации

Страница: 6 / 16

GB-6
2. Place the one accessory
CR2032 battery in the remote
control according to the
polarity markings (+ and –)
inside the compartment and
on the battery.
3. Close the battery
compartment cover.
Scope of Application
This universal remote control is designed to control
4 devices such as:
TV: TV
DVD: DVD player and DVD recorder
SAT: Satellite receiver, Cable Box, DVBT, …
AUX: for additional devices (TV, VCR, SAT, DVBT,
CABLE, CD, DVD, …)
Remove the Insulating Strip
1. Press and lift the back cover
up to open the battery
compartment of the remote
control.
When exchanging the battery, it may be necessary
to reprogram the unit. Hence it is advisable to
record the codes needed for your devices.
Used battery does not qualify as household waste.
The battery must be disposed of at a special
collection point for used batteries.
Programming the Device
Codes
The codes of the respective devices can be found
in the code book attached to these operating
instructions.
Note:
you can dedicate any device (TV, SAT, VCR, …)
to the Mode buttons ( TV/DVD/SAT/AUX ). You just
need to enter the 4 digit code (found in the code
book) of the device, i.e.: a DVD code under the AUX
button. In any case, follow the steps below:
1. Switch on manually the device you wish to
control (TV, DVD, SAT, …).
Remove the insulating mylar strip
from the battery if the battery is
being used for the first time. It is
located at the bottom back side
of the remote control.
Inserting the Battery
CRC4N110_IB_100920_Zell.indd 6 20/09/2010 9:31 AM