Currys CRC4N110, Инструкция по эксплуатации

Страница: 8 / 16

GB-8
1. Press and hold the
SETUP
button for approx. 3 seconds
until the LED indicator flashes
then illuminates. Then release
the
SETUP
button.
2. Press the desired mode
button (TV, DVD, SAT, AUX) .
The LED indicator flashes.
3. Press the SETUP button
again. The LED indicator will
flash once then illuminate.
4. Point the remote control
at the device you wish to
control and press CH+ once.
The remote control starts the
search, sending a code every
second. Each time a code is
sent, the LED indicator will
flash once then illuminate.
5. When the device responds to
the remote control, press the
OK
button.
• At step 4, you can search for codes more quickly by
repeatedly pressing the
CH+
button. As this may
involve pressing the button over 200 times, please
be patient.
• If at step 5, you fail to press the OK button in time,
you can step by step return to the code to which
the device has responded using the
CH–
button.
• If you device doesn’t have the
CH+
button, you can
use the button or the button.
• If all codes have been searched, the LED indicator
will flash for about 3 seconds.
• If certain functions of your equipment can’t be
controlled you have to find a different code for
your brand.
CH+
VO
L–
CH–
VO
L+
OK
CH+
VO
L–
CH–
VO
L+
OK
TV DVD SAT AUX
Code Identification
The code identification allows you to identify
codes that you have already entered and that are
memorised in the remote control. Follow the steps
below:
SHIFT SETUP
SHIFT SETUP
3. Press the desired mode
button
(TV, DVD, SAT, AUX)
.
TV DVD SAT AUX
CRC4N110_IB_100920_Zell.indd 8 20/09/2010 9:31 AM