GB-18
Bef
or
e U
se
Oper
ation
Specifica
tion
Installa
tion
Saf
et
y
W
ar
nings
Cleaning and M
ain
tenanc
e
Fitting the plinth
For the efficient operation of the appliance, it
is important that the original ventilation grid
is used.
•
For an opening height dimension A=820 mm and
a plinth height dimension a=100 mm, the plinth
may be fitted without adjustments. The same
applies to an opening height dimension B=890
mm and a plinth height dimension b=170 mm.
•
For plinth heights greater than a=100 mm, b=170
mm, a cut should be made in the plinth, 580 mm
wide, in the centre of the appliance position,
leaving a remaining height of a=100 mm, b=170
mm. Attach plinth to the kitchen units.
The plinth must be positioned at a minimun distance of 25 mm from the door.
580
a
=
100
b
=
170
25 - 80
A
=
820
B
=
890
25
1. Fit both the double threaded bolts to the top of the fridge door. Leave a gap of 2mm between the
double threaded bolt and the top of the fridge door.
3. Fit the upper connecting blocks after drilling
holes.
4. Fit the lower connecting blocks to the bottom
of the fridge door.
5. Hang the aesthetic
door onto the
fridge door.
6. Align the door by adjusting the double
threaded bolts.
7. Once alignment is achieved , fit the domed
headed nuts.
8. Open the fridge door and screw the bottom of
the aesthetic door to the lower connecting
block. Remember to predrill the holes Ø28mm
to a depth of 10mm.
domed headed nuts
fridge door
fridge door
aesthetic door
aesthetic door
aesthetic
door
screw
screw
lower connecting
block
bolt
fridge door
double
threaded bolt
double threaded bolt
fridge door
2mm
fridge door
upper
connecting
block
aesthetic door
2. Drill the holes on the inside of the aesthetic door according to the dimension diagram shown below.
Only drill to a depth of 10mm.
130mm 130mm
aesthetic
door
fridge
door
Ø2.8mm
10mm depth
A+9.5mm
A
A: the distance between the top of the fridge door to
the top of the adjacent cabinet door.
Ø2.8mm
10mm
fridge door
aesthetic door
Currys Essentials CIR60W10_IB_101006.indd 18
10/6/10 10:14 AM