GB-11
Bef
or
e U
se
Oper
ation
Specifica
tion
Installa
tion
Saf
et
y
W
ar
nings
Cleaning and M
ain
tenanc
e
Maintenance
Changing the Internal Light
1. Before carrying out the bulb replacement always press and turn the
thermostat control dial to Position 0, then disconnect the mains supply.
2. Hold and unscrew the light bulb cover.
3. Remove the plastic light bulb cover.
4. Remove the old bulb by unscrewing in an anticlockwise direction.
5. Replace with a new bulb (15W SES). Please make sure that it is secure in
the bulb cover.
6. Refit the translucent light cover and reconnect your unit to the mains
supply and switch on and reset the thermostat.
Care When Handling / Moving Your Unit
Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by
holding the edges of the top surface.
Servicing
This unit should be serviced by an authorised engineer and only genuine spare parts should be
used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by
inexperienced persons may cause injury or serious malfunction. Contact a qualified technician.
When the unit is not in use for a long period of time, disconnect it from the mains supply, empty all food
and clean the appliance, leaving the door ajar to prevent unpleasant smells.
Disposal
Old appliances still have some residual value. An environmentally friendly method of disposal will ensure
that valuable raw materials can be recovered and used again. The refrigerant used in your appliance and
insulation materials require special disposal procedures. Ensure that none of the pipes on the back of the
appliance are damaged prior to disposal.
Up to date information for the disposal of your old appliance and the packaging from your new one can be
obtained from your local council office.
When disposing of an old appliance break off any old locks or latches as a safeguard.
Currys Essentials CIR60W10_IB_101006.indd 11
10/6/10 10:14 AM
