manualshive.com logo in svg

Currys Essentials CFSGSV12, Инструкция по эксплуатации и монтажу

Поделиться
Скачать
Currys Essentials CFSGSV12 Скачать руководство пользователя страница 24

24

Gas Connection

The installation of the cooker to Natural Gas or LP Gas must be carried out by a Gas Safe registered engineer. 

Installers must take account of the provisions of the relevant British Standards Code of Practice, the Gas Safety 

Regulations and the Building Regulations.

Installation Relevant to Natural Gas

Installation to Natural Gas must conform to the Industry Standards, etc. The supply pressure for Natural Gas is  

20 mbar.

Installation Relevant to Liquid Petroleum Gas (LPG)

This appliance must only be connected to LPG after an LPG 

conversion kit has been fitted. The installation must conform 

to the relevant British Standards.

It is recommended that the gas connection to the cooker is installed with a flexible connecting tube 

made to BS669.

•  Only a suitably qualified and Gas Safe Registered 

Engineer may convert the appliance to a different 

gas type.

•  When using Butane gas a supply pressure of 28 -30 

mbar is required.

•  When using Propane gas a supply pressure of 37 

mbar is required.

•  Flexible hoses can be used where the sited 

ambient temperature of the hose does not exceed 

70°C. These hoses must be manufactured in 

accordance with BS669 part 1 and be of the correct 

construction for the type of gas being used.

•  Gas hoses designed for natural gas MUST NOT be 

used for supplying LPG gas (LPG gas hoses can be 

identified by a either a red band or stripe on the 

rubber outer coating of the hose).

•  The hose should not be crushed or trapped or be 

in contact with sharp or abrasive edges. It should 

also not be subjected to corrosion by acidic 

cleansing agents.

* All images are for indication only; please refer to your individual unit for actual item.

CFSGWH_SV12_IB_120607_Annie.indd   24

12年6月7日   下午7:15

Содержание CFSGSV12

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды