Currys Essentials C55T W11, Инструкция по эксплуатации

Страница: 6 / 20

INSTALLATION
6
2. Carefully remove the doors by pulling the
middle hinge and doors towards you to
release the hinge. The top door may need
lifting to allow this. Lower the top door off
the top hinge pin, Lift the bottom door off
the lower hinge pin.
3. Ensure the unit is empty (remove the glass
and door shelves). Lay the unit down on its
left hand side carefully to avoid damage.
Remove both levelling feet from their fixing
plates. Remove the bottom hinge fixing
screws and remove it. Remove the two
phillips screws from the left hand hinge
fixing plate (these will be shorter than the
hinge screws) and insert into the holes on
the right hand side where you just removed
the bottom hinge.
4. Unscrew the bottom hinge pin using a flat
blade screwdriver and screw into the next
hole (see diagram). Then screw the bottom
hinge into left hand side using the longer
screws. Screw both levelling feet back into
the unit. The unit can now be stood upright.
5. Place the two middle hinge screw caps (big)
as shown in the figure. You will find new
caps, if needed, in the user instruction bag.
6. Remove the top hinge pin (using a flat blade
screwdriver) from the right hand side and
screw into the hole on the left hand side.
Insert the
two middle
hinge screw
caps (big)
here.
C55TW11_IB_final110325.indd 6 25/03/2011 10:50 PM