SPA525FR User’s Installation Guide
Packaging and Enclosed Parts
The following diagram shows all of the included parts for assembly and installation. Please inspect your pack for damaged or missing
parts. Notify your supplier if any discrepancies occur.
V-rails (4)
(2 pc each
speaker)
Speakers
C-ring
Rough-ins
Fastlock
Speakers
Grilles
Rough-in
Mounting
Screws
Only simple hand tool are required for assembly and
installation.
Required tools: #2 Phillips screwdriver, Small Flathead
slotted screwdriver with a
1/8” inch blade or smaller, Drywall Hand saw. A saber may
be requires if you are cutting into plywood.
Painting the Speaker Grille
Tear along the smaller perforated line of the cutout template marked as a paint shield. Push it into the front baffle of the speaker. Paint the
front.
Remove the paint shield after the paint has dried.
Drywall Ceiling Installation
1
Take the cutout template from the packaging box and
punch out along the larger perforated circle.
Place the cutout template against the ceiling and
and trace along the inside circle. Carefully cut out
the ceiling material along the circle.
Trace Template
Cut Material
Rev 92020Rev1 06/09
