Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Ellia 3000Hand-E | MODEL V2021
P a g e |
11
Step 3.
Loosen the wing nut on the Drill Holder
(C)
. Slide the holder along the Main Body
until the Drill slips into the Holder.
Step 4
Pull the cable through so the Trigger rests onto the Drill Trigger (
see figure b
),
(make sure that the other end of the cable is firmly pushed into the actual Throttle)
(
see figure c
). Once you have the trigger set, bend the cable over and do up the
wing nut tight (this holds the cable into place) (
see figure d
). Do up the bolts for
the Adjuster so the Holder can’t move
(
see figure e
).
Figure b
Figure c
Wing Nut
C
