Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Ellia 3000Hand-E | MODEL V2021
P a g e |
10
Step 2.
Insert the bolt and washer into the mount hole and into the Main Body
(E)
and
tighten. Insert the wing nut, nut (spacer) and washer into the adjusting mount
and into the Main Body
(E)
and tighten. 4 holes to choose from, however we
recommend starting with the second hole from the top
–
this gives you a straight
handle, the handle can be adjusted here at any time.
Drill Holder
Step 1.
Undo the 3 nuts/bolts from the Main Body
(E)
, take the Drill Holder
(C)
and attach
the end with the adjuster to the 3 bolts on the Main Body. Do up the bolts finger
tight so that the Drill Holder can slide for adjustment.
Step 2.
Take the drill that you will be using,
(make sure you have taken the battery
pack off for this stage of the assembly).
Take your drill and insert the chuck
onto the shaft (K) and tighten the drill chuck.
C
Adjuster End
Drill Shaft
C
K
