CURIOSIS Celloger Mini, Инструкция по эксплуатации

Страница: 17 / 34

17
3. Details
Focusing
➢
Manual adjustment
Adjust focus in Jog by using . Possible to adjust focus by using “ + ”, “ - ” on the number pad of the keyboard.
➢
Auto focusing
The Celloger’s Autofocus algorithm scans within a certain depth and selects the area where cells are clearly shown.
Therefore, location should be set manually first and execute Autofocusing function.
1.
Set the rough focus manually.
2. Adjust focus and press AutoFocus .
Note : In the AF panel in Setup mode, autofocusing can be set.
✓
Depth [mm] : Range of AutoFocus fuction
✓
Resolution [mm] : Scanning unit within depth
✓
ROI Section : The area can be selected and AutoFocus
algorithm is executed based on the selected area.
Plate panel
Possible to set scanning order by right clicking the mouse on Plate panel. The table on the left side of the Plate panel
shows Scan Position Set.
✓
Move to center position : Move to center position : Upon
clicking vessel on plate panel, it moves to the center.
✓
Move to mouse position :
Upon clicking the desired
location in the vessel on Ctrl + plate panel, it moves
to the location clicked.