EN
15
SYMBOLS
Read the instructions.
Approved as per applicable
directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Protection rating
IP44
Output
120 W
Cord length
100 cm
Size
860 x 530 mm
DESCRIPTION
1. Status light timer 4 h
2. Status light timer 2 h
3. Timer
4. ON/OFF switch
FIG. 1
INSTALLATION
WALL MOUNTING
1. Mark out the screw holes on the wall. Drill
holes in the wall and insert plugs.
2. Fit the bracket with one screw in the nut
on the towel rail.
FIG. 2
3. Fit the wall bracket with the screws.
4. Tighten the locking screw with hex key.
WARNING!
could result in fire, electric
shock or personal injury.
IMPORTANT:
• The product must only be
used in an upright position.
• Service must only be carried
out by an authorised service
centre.
• Do not place the product
directly below a power
outlet.
ELECTRICAL SAFETY
New installations and
extensions to existing systems
should always be carried out by
an authorised electrician. If you
have the necessary experience
and knowledge (otherwise
contact an electrician), you
can replace power switches
and wall sockets, fit plugs,
extension cords and light
sockets. Incorrect installation
can result in fatal injury and
the risk of fire.
