EN
17
USE
HOW TO USE
Power switch
• Put the power switch in the on position (1)
(the status light goes on). The product
starts.
• Put the power switch in the off position
(0) (the status light goes off). The product
is switched off.
NOTE:
Switch off the towel rail and pull out the plug
when it is not in use.
SWITCHBOX
1. Fit the switchbox on the towel rail.
2. Remove the side cover.
FIG. 3
3. Pull the power cord through the bottom
of the switchbox, leaving a suitable length
sticking out.
FIG. 4
4. Screw the switchbox firmly onto the
vertical tube on the towel rail.
FIG. 5
Terminals
1. Put the terminal block in the switch box
and check the markings.
2. Connect the neutral, live and
wires
on the power cord to the corresponding
terminals.
3. Replace the cover and screw tight.
4. Fit the cover plate on the back to conceal
the power cord.
FIG. 6
WARNING!
The installation must be carried out by an
electrician or other qualified personnel to
ensure safe use.
