9
Ed. 0121 - 70702601 REV00 Rounding machine - Preinstallation
H
2
O
min.
500 mm
(
in. 19,7
)
Max 35°C
Max 70%
Min 5°C
Max 104°F
Min 41°C
Fig. 4
Fig. 5
Fig. 6
Transport
Fig. 4
Fitted with personal protection equipment, transport the
appliance to the installation location. Use suitable equipment,
capable of dealing with its weight: persons not involved with
the appliance installation may not pass through or stand in the
work area during the appliance assembly. During the transport,
pay particular attention to passing through openings and/or
doors.
Preliminary operations
Fig. 5
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the product are in
good condition and without any faults or breakages, if
that is not the case, contact the Dealer for the proce-
dures to follow.
Positioning
Fig. 6
Install the appliance in a room:
•
dedicated and suitable to the cooking of food;
•
having adequate air ventilation;
•
containing no flammable or explosive elements;
•
that complies with the current regulations on health and
safety and systems in your country;
•
is protected from the weather;
•
has a maximum temperature of b5° (41°F) and
+35°C (95°F);
•
has a maximum humidity of 70%.
Leave a free space of at least 20 cm between the appliance and
the walls of the room and/or other equipment to facilitate the
use, cleaning and maintenance of the machine itself.
To reduce the risk of a fire,
comply with the stated
minimum distances
and install the appliance in
fire-
proof
environments that are
not at risk of explosion
.
The floor of the installation room must have a surface
fire-
proof
finish too.
Installation
