Cuppone PZF/30, Руководство по предварительной установке и установке, Страница: 7 / 40

7
Ed. 0121 - 70702570 REV02 Pizzaform - Pre-installation
4
1
7
10
13 14
11
8
12
9
2
3
5
6
Fig. 4
2
TECHNICAL DATA
The main parts of the machine are:
1
Cycle start and protection grille
: prevents you from inserting
your hands between the plates while the cycle is in progress; if the
protection is released during flattening, the movement of the lower
plate is immediately interrupted and reversed.
2 Upper plate
3 Lower plate
4 Control panel and emergency STOP button
5 Flattening adjustment lever : varies the distance between the
two plates and therefore the thickness of the dough disk; by moving
the lever in a counter-clockwise direction the thickness decreases,
moving it in a clockwise direction increases the thickness.
6
Adjusting lever stop:
determines the minimum distance that can
be set between the plates
7
Lifting point
(mount the eyebolt supplied)
8 Circuit breaker (only American market)
9 Equipotential
10
Supply cable
(not present in the models for the American market)
11 Adjusting feet
12 Left panel
(electrical panel compartment)
13 Right panel
(motor - gear unit compartment)
14 Back panel
not present in the models for the
American market
only for the
American
market