Cuppone PZF/30, Руководство по предварительной установке и установке, Страница: 5 / 40

5
Ed. 0121 - 70702570 REV02 Pizzaform - Pre-installation
D Electrical connection (qualified electrician’s inspection)
√
For a correct connection during the installation:
•
provide a socket connecting to the electrical network near the
product.
•
machines NOT for the American market - UL have the power
cable already installed; a plug (not supplied) must be fit-
ted to it
of suitable capacity. This operation must be carried out
by qualified personnel.
•
machines for the American market - UL have NO power cable
and NO plug. Both are NOT supplied, must be fitted by qualified
personnel and must be only of the type stated in the table.
•
check that the systems in the room comply with the legal
provisions in force in the country of use
and meet the spec-
ifications on the serial number plate. For a correct electrical con-
nection, the appliance must:
•
be included in an equipotential system in compliance with
the legislation in force. This connection must be made be-
tween the various devices with the terminal marked with the
equipotential symbol . The cable must have a maximum
cross-section of 10 mm 2 (in compliance with IEC EN 60335-2-
42:2003-09) and must be yellow-green;
•
must be grounded to the mains (green-yellow wire);
•
must be connected to a
thermal differential switch
in com-
pliance with the regulations in force (0.03A A type);
•
must be connected to an
omnipolar circuit breaker
allowing
complete disconnection in overvoltage III category conditions.
Electrical data
Model
Pizzaform
Supply
V
Upper
h.elem.
W
Lower
h.elem.
W
Motor
W
Tot. kW
Absorbed
current
A
Cable type*
n x mm 2
Cust. panel
prot.
nxA
30
single-phase 230V/50Hz 1790 1790 370 3.95 17.2 3x2,5 2 x 20
three-phase 3x230V/50Hz 1790 1790 550 4.13 10.4 4x1,5 3 x 16
three-phase N/50Hz 1790 1790 550 4.13 6.0 5x1 4 x 16
single-phase 208V/60Hz 1790 1790 550 4.13 19.9 3xAWG14 2 x 25
three-phase 3x208V/60Hz 1790 1790 550 4.13 11.5 4xAWG14 3 x 16
35
single-phase 230V/50Hz 1790 1790 370 3.95 17.2 3x2,5 2 x 20
three-phase 3x230V/50Hz 1790 1790 550 4.13 10.4 4x1,5 3 x 16
three-phase N/50Hz 1790 1790 550 4.13 6.0 5x1 4 x 16
single-phase 208V/60Hz 1790 1790 550 4.13 19.9 3xAWG14 2 x 25
three-phase 3x208V/60Hz 1790 1790 550 4.13 11.5 4xAWG14 3 x 16
40
single-phase 230V/50Hz 2400 2400 750 5.55 24.1
3x2
.5
2 x 25
three-phase 3x230V/50Hz 2400 2400 750 5.55 13.9 4x2,5 3 x 16
three-phase N/50Hz 2400 2400 750 5.55 8.0 5x1
.5
4 x 16
single-phase 208V/60Hz 2400 2400 750 5.55 26.7 3xAWG14 2 x 32
three-phase 3x208V/60Hz 2400 2400 750 5.55 15.4 4xAWG14 3 x 16
45
single-phase 230V/50Hz 2900 2900 750 6.55 28.5 3x4 2 x 40
three-phase 3x230V/50Hz 2900 2900 750 6.55 16.4 4x2,5 3 x 16
three-phase N/50Hz 2900 2900 750 6.55 9.5 5x1,5 4 x 16
single-phase 208V/60Hz 2900 2900 750 6.55 31.5 3xAWG12 2 x 40
three-phase 3x208V/60Hz 2900 2900 750 6.55 18.2 4xAWG12 3 x 20
50
single-phase 230V/50Hz 2900 2900 750 6.55 28.5
3x4
2 x 40
three-phase 3x230V/50Hz 2900 2900 750 6.55 16.4 4x2,5 3 x 16
three-phase N/50Hz 2900 2900 750 6.55 9.5 5x1,5 4 x 16
single-phase 208V/60Hz 2900 2900 750 6.55 31.5 3xAWG12 2 x 40
three-phase 3x208V/60Hz 2900 2900 750 6.55 18.2 4xAWG12 3 x 20
Checks before purchasing
* These cables can only be used if their length does not exceed 2 m between the point where the cable or its protection enters the
appliance and the entry into the plug.