Cuppone Pizzaform Series, Инструкция по установке, использованию и техническому обслуживанию

Страница: 27 / 76

11
7
8
9
10
14
3
2
13
11
5
6
1
4
12
V. INSTRUCTION FOR USE
1.
Control panel description
The control panel, placed on the appliance’s front side, is made up as follows:
GB
1. Display : shows the upper plate real temperature and the set one, plus plates contact
time.
2. Led display 1 indicates switching on of the upper plate resistance.
3. Display : shows the lower plate real temperature and the set one.
4. Led display 2 indicates switching on of the lower plate resistance.
5. + key : raises the upper plate set temperature and the plates contact time.
6. - key : reduces the upper plate set temperature and the plates contact time.
7. + key : raises the lower plate set temperature.
8. - key : lowers the lower plate set temperature.
9. TIMER Led indicates contact time settings.
10. TIMER key : shows on display 1 plates contact time in seconds.
11. ON/OFF key : switches on and off the machine.
12. OFF key : to switch the appliance off and stop the lower plate from rising in an emergency.
13. Adjustment lever : to vary the distance between the two plates and consequently the thickness of
the pizza base or crust; move the lever to the right to decrease the thickness, to
the left to increase the thickness.
14. Guard : to prevent the possibility of foreign matter entering between the plates; if the
guard is released during the flattening process, the movement of the lower
platen is stopped and reversed immediately.
.