background image

You can adjust the ground coffee dispenser 

(8) to obtain a SMALL MEASURE (minimum 

5g.) up to a LARGE MEASURE (maximum 

12 g.) as follows:

To obtain a SMALLER Measure:

a) Stop the grinder using the ON/OFF 

switch (11).      

b) Remove the ground coffee dispenser lid 

(7).

c)Turn the ground coffee screw (9) TO THE

RIGHT.

d) Replace the ground coffee dispenser lid 

(7).

To obtain a LARGER Measure:

a) Stop the coffee grinder using the ON/ 

OFF switch (11).

b) Remove the ground coffee screw (9) TO 

THE LEFT.

d) Replace the ground coffee dispenser lid 

(7).

The  coffee  grinder 

SHOULD NOT BE OPE-

RATED  CONTINUOSLY 

FOR  MORE  THAN  30 

MINUTES.

If you observe any

abnormal operation, turn off the coffee grin-

der,  unplug  it  immediately  from  the  mains 

outlet, and contact CUNILL’s Technical Ser-

vice your dealer.

It is very important to regularly clean the

coffee grinder’s different parts.

To avoid any incidents, you should clean

the machine with the indicated frequency

following these SAFETY GUIDELINES:

a) Before cleaning any part of the coffee

grinder (even the outer shell) make sure you

turn it off using the on/off switch (11) and

unplug the coffee grinder from the mains

outlet.

b) Never clean the coffee grinder using

running water or submerging it in water.

c) Never use abrasive cleaners or chemical

solvents..

Frequency: Every 25 days.

a) Unplug the grinder using ON/OFF switch 

(11).

b) Loosen the lockscrews (3) which fasten

the hopper to the adjusment platen (4) and

remove the hopper (2).

c) Clean the hopper using a highly diluted

solution of dishwasher liquid in water.

Always wash the hopper by hand, never

place in the dishwasher.

d) Make sure the hopper is completely dry

before re-attaching it and locking the screws

(3).

18   

Adjusting Ground Coffee Amount 

Dispensed by the Coffee Grinder

20   

Cleaning Precautions

21   

Cleaning the Hopper

19  

Maximum Operating Time

Содержание brasil





























Отзывы: