CUMMINS ALLISON JetCount 4020 Скачать руководство пользователя страница 41

Страница: 41 / 45

Glossary

Safety Messages and Advisories

Icon

Definition

Warning indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

Caution indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

Notice is used to address practices not related to physical injury. In this manual,

notice indicates a situation which, if not avoided, could result in property

damage.

Stop highlights a situation where an incorrect action or sequence of actions

could lead to lost or inaccurate data, operation in an incorrect mode, or

unintended outcomes in machine function.

Note highlights information that is interesting or useful to know after

completing a procedure.

Terms

Term

Definition

Batch

Documents processed as an overall group. Documents will be recorded as

coming from one general source.

Chains

A condition that occurs when two or more documents run through the JetCount

reading mechanism without proper spacing.

Count Processing

(COUNT) Mode

Counts any currency, food stamps, coupons, etc., that fit the hopper size.

Operates like any other currency counter in that it is only counting “slips of

paper” (no currency scanning takes place).

Currency Processing

(VALUE) Mode

The DENOM or Direct Access Denomination keys permit setting the JetCount so

that each note passing through the machine is counted as if it were a specific

value of currency.

Default

Conditions of operation that are either established during the setup process

(which remain unchanged until reset) or have been incorporated into JetCount

during manufacturing (to which the machine returns each time it is turned OFF,

then ON).

Display

The Vacuum Fluorescent Display screen on the front of the machine reports the

operating status.

Doubles

A condition that occurs when two documents pass through the JetCount reading

mechanism simultaneously — stacked one on top of the other. The machine will

stop when this condition occurs.

Содержание JetCount 4020














































Результаты поиска

Содержание JetCount 4020

Отзывы:

Похожие инструкции для JetCount 4020

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetCount 4020, Руководство по эксплуатации

Результаты поиска

Содержание JetCount 4020

Отзывы:

Похожие инструкции для JetCount 4020

Бренды по названию

Популярные бренды