CUMMINS ALLISON JetCount 4020 Скачать руководство пользователя страница 31

Страница: 31 / 45

Comm Report

This field enables Normal Communications Report format or Wedge Communications Report

format. When connected to the Cummins Allison Software Wedge, be sure to set Port 1 or Port 2

to standard computer interface (COMP) and COMM Report to “Wedge.” In all other

circumstances, set COMM Report to “Normal.”

Options

The magnetic head function (MAG) or UV Option (includes UV and FL) for suspect document

detection can be enabled if the magnetic head and UV are installed, otherwise it should be

disabled. For JetCount model 4020, both MAG and UV should be disabled. For JetCount model

4021, UV should be disabled

SD Function Control

Enables or disables the ability to view and change SD sensitivity settings during normal

operation. Key Status and Options affect this feature. Please refer to the following chart.

(For information on how to handle a suspect document during processing, see

Stopping

Conditions and Recovery Steps

Key Lockout Option

SD Function

Control

Results

MAG UV

OFF

ON/OFF

•

SD is locked ON or OFF.

•

If SD is locked ON, cannot change sensitivity

level of Hi-Med-Low. Able to view, but not

change sensitivity settings.

•

If SD is locked OFF, cannot view or change

sensitivity settings.

OFF

•

SD key is locked ON or OFF.

•

If SD is locked ON, Hi-Med-Low level can be

changed and sensitivity settings can be

changed.

•

If SD is locked OFF, cannot view or change

sensitivity settings.

OFF/ON

•

If Mag or UV Option is OFF, Key Lockout for that

option is automatically set to OFF. However, if

the Option is changed to ON, Key Lockout will

not revert to the ON setting.

•

If Option is set to OFF, cannot change or view

sensitivity settings for that option.

•

If Option is set to ON, can view and change

sensitivity settings.

Содержание JetCount 4020














































Результаты поиска

Содержание JetCount 4020

Отзывы:

Похожие инструкции для JetCount 4020

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetCount 4020, Руководство по эксплуатации

Результаты поиска

Содержание JetCount 4020

Отзывы:

Похожие инструкции для JetCount 4020

Бренды по названию

Популярные бренды