Part No. 4801-5188 Rev 3-2016
Super-Saver XL Heater
– Australian Model
Page
9
of 32
C A U T I O N !
The minimum side clearance to combustible walls must be 305 mm (12 inches).
The minimum clearance between the appliance and rear wall must be 305 mm (12 inches).
Weeds, snow, or other materials must not be allowed to accumulate on heater or adjacent to heater. Heater and
thru-wall extension duct must be a minimum of 500 mm (20 inches) above ground and out of reach of livestock.
Detail C
1
2
3
4
5
6
7
8
9
10
11
12
13
Detail D
Figure 1a
Legend
1. Wall (By others)
2. Rain shield, included with OSM kit.
3. Door & cover included with OSM kit.
4. Mounting brace, included with OSM kit.
5. Gas shutoff valve, included with heater.
6. Thru-wall extension duct, included with OSM kit.
7. Dual flare duct. Use T-duct included with heater
or use optional OSM Y-duct ordered separately.
8. Extension flange, included with OSM kit.
9. Gas hose, optional ordered separately.
10. 2 x 4 Framing for Brace, not included
11. ‘Varmint’ flap, included with OSM kit.
12. Inner flashing seal, included with OSM kit.
13. Outer flashing, included with OSM kit.
Door Cover
Door
NOTE
After door cover installation to
the heater door, bend four tabs
(one in each corner) 90 degrees.
Door Cover
Existing Bend
Direction
Figure 1b
Figure 1c – Door Cover Installation
Door Cover Bent
Assembled Heater
Chain Hooks
Optional Wind
Guard
OSM Kit
