Cumberland
1004 E. Illinois St.
Assumption, IL 62510
PHONE 1-217-226-4421
FAX 1-217-226-4420
Part No. 4801-3006 Rev 1-15 Mega Flow Cone Fan
– Unassembled 14 of 15
NOTE: The 48” Fan Guard
assembly must use a longer
bolt with spacer.
8. Shutter Installation
NOTE: Shutter Fits Onto Intake Side of Fan
1. Lift shutter.
2. Check that shutter is flush against housing at all points.
3. Manually open vanes of shutter to gain access to latches on fan housing. Lock shutter latches.
4. Installation complete.
Carefully lift shutter!
Note: Latch is hidden in this
view. See diagram on Page 9.
Slot for latch
With
shutter
in
place,
manually
open
vanes
of
shutter to access latch. Fasten
latch
(located
inside
fan
housing) into slot in flange of
shutter. Firmly lock down
latch. Repeat procedure to
latch opposite side of shutter.
NOTE for the 48"
Fan Guard ONLY:
Attach with spacer.
1001-1446
1/4-20 nut
1003-0108
1/4"ID x 5/8"OD washer
0403-10755
spacer
1004-0117
1/4-20 x 2.5” bolt
1003-0112
1/4"IDx1"OD
Washers (2)
Figure 15: 48” Outside Guard Assembly
