Cumberland Expert-32T, Руководство пользователя

Страница: 16 / 76

16
Expert-32T rev.03
Expert-32T
13. Number of Heaters and Fan
Stages
: Press the Edit key to adjust the
number of heaters used. Press the Edit
key once again to adjust the number of
fan stages.
14. Number of Cooling and Clock
Outputs: Press the Edit key to adjust
the number of cooling outputs used.
Press the Edit key once again to adjust
the number of clock outputs used.
15. Number of Inlet Outputs / Tunnel
Ventilation: Press the Edit key to adjust
the number of inlets used. Press the
Edit key once again to enable or disable
tunnel ventilation. Note that the inlet
cannot be modified if the control uses
the static pressure sensor.
16. Vent Doors : Press the Edit key to
enable or disable vent doors. Note that
the vent doors can be modified only if
the control uses the static pressure
sensor.
17. LED Display Mode : Press the Edit
key to change the display mode on the
LED display on the top right of the
control panel. You can choose between
the temperature (T), the static pressure
(SP) or an alternating display of both
the temperature and the static pressure
(T/SP).
18. Room 1 / Room 2 Mode : Press the
Edit key and set to yes to activate the
two rooms. If they already have been
set, room 2 parameters are kept in
memory if the two room mode is deactivated.
#Heaters: 4
#Fan stages: 10
#Cooling: 2
#Clocks: 0
#Inlets: 0
Use tunnel? NO
Use vent door?
NO
Display:
T only
Use Room 1/
Room 2? NO