background image

 

Super Saver Bunsen Jet Brooder with SPI 

3

 

3. 

Limited Warranty 

 
All products are warranted to be free from defects in material and workmanship if installed and 
used in strict accordance with the installation instructions. Liability is limited to the sale price of 
any products proved to be defective or, at manufacturers option, to the replacement of such 
products upon their return. No products are to be returned to the manufacturer, until there is an 
inspection and a return goods authorization (RGA) number is issued.  
 
All complaints should be directed first to the authorized distributor who sold the product. If 
satisfaction is not obtained or the name of the distributor is not known, write the manufacturer that 
appears below, directed to the attention of Customer Service Manager. 
 
This limited warranty is expressly in lieu of any and all representations and warranties expressed 
or implied, including any implied warranty of merchantability or fitness for a particular purpose. 
The remedy set forth in this limited warranty shall be the exclusive remedy available to any 
person. No person has authority to bind the manufacturer to any representation or warranty other 
than this limited warranty. The manufacturer shall not be liable for any consequential damages 
resulting from the use of our products or caused by any defect, failure or malfunction of our 
products. (Some areas do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you.) 
 
This warranty gives you specific legal rights and you may also have other rights which vary from 
area to area. 
 

 

Warrantor: 

 

Cumberland.  

 

1004 E. Illinois St.  

 

Assumption, IL 62510 

 
 

4. 

Physical Description / Drawing of Product 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The Super-Saver Bunsen Jet radiant brooder uses a reliable standing pilot ignition system to ignite 
the burner.  The Bunsen styled burner’s flame impinges on the surface of the cast ceramic 
element.  The heat is then transferred to the livestock in the form of radiant heat and convection 
heat. 

 

Содержание BJ-C-32-SPI
















Отзывы: