CULUS 1374093, Руководство пользователя

Страница: 19 / 69

19
Operation
back on without being reset. It
can be reset by switching the On/
Off Switch to Off and waiting five
(5) minutes before switching the
unit back on.
Remote Control
The fireplace is supplied with a
radio frequency remote control.
This remote control has a range
of approximately 50 feet (15.25
m), it does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with one of
hundreds of independent frequen-
cies to prevent interference with
other units.
!
NOTE: Before attempting any
operation with the remote, pull
the plastic insulator strip out
from between the remote cas -
ing and battery cover (Figure
19).
Remote Control Initialization/
Reprogramming
If the remote control or remote
control receiver has been re -
placed, follow these steps to
initialize the remote control and
receiver:
1. Ensure that power is supplied
through the main service
panel.
2. Turn On/Off Switch to On
(Figure 18A).
3. Move the 3-Position Switch
to the “ REMOTE ” position
(Figure 18B).
4. Press and hold the Manual
Control Button marked “ I ” for
five (5) seconds. After five (5)
seconds, there is a 10 second
window to press any button
Figure 19
Off
Button
On
Button
Battery
cover
Plastic
strip