CULUS 1374093, Руководство пользователя

Страница: 14 / 69

Fireplace Installation
12. Carefully replace and install
partially reflective glass and
glass brackets using screws
from step 1.
13. Refer to Front Glass Installa -
tion section, page 17 for final
installation procedures.
In-wall Recessed Installa-
tion - 2x4 Framing
CAUTION: Two people may
be required for various steps
of this procedure.
1. Prepare a wall with a framed
opening of 46 ½ in. (118.1
cm) wide x 16 ½ in. (42 cm)
high (Figure 10).
!
NOTE: The sizing has allowed
for 1/4 in. (6.4 mm) around the
fireplace insert for ease of instal -
lation. This fireplace does not
require any additional venting.
2. Choose your method of sup
-
plying power to the unit:
• Plug in (you may run the
power cord out of the framed
wall opening to an existing
outlet or install an outlet on
a nearby wall stud within the
wall).
• Hard wire the fireplace
(recommended). Follow the
hard wiring instructions on
page 9.
WARNING:
Do not attempt
to wire your own new outlets or
circuits. To reduce the risk of fire,
Figure 11
Mounting
holes
Figure 10
2 x 4 Framing
14