CULITEK TEKCO1-LP, Руководство по эксплуатации

Страница: 19 / 24

- 17 -
Pulse Fan function.
8.Start/Stop Button: tarts/Stops the cooking
WARNING: Wait for the equipment to cool down after the unit has been turned off
before you clean!
Comprehensively check the equipment at least once every year by authorized and licensed
technicians .
The product is made of 90% metals, and can not be discarded everywhere. Deal with it in
accordance with the local codes.
Instructions to clean appliance regularly with recommended cleaning agents, if necessary.
Warning: If any fault occurs, please stop using, and contact technicians to check and
repair. Safety first, turn off the power and gas supply before maintenance.
WARNING: Units provided with casters have a restraint to limit the
movement of the oven. If this restraint is disconnected during servicing it must be
reconnected after the appliance has been returned to its original installed position.
These maintenance instructions are for the use of qualified service personnel only. Service
by other than qualified personnel may result in damage to the oven and/or injury to the
operator.
Qualified service personnel are those individuals, firms, companied or corporations
which either in person or through an agent are engaged in and responsible for repair or
servicing of commercial food preparation equipment, who are experienced in such work,
familiar with all precautions required, and have complied with all requirements of state and
local authorities having jurisdiction.
ADJUSTMENTS
Quite often malfunctions, which are attributed to defects, may be repaired by adjusting
certain parts rather than replacing them.
DOOR ADJUSTMENT
The gas-fired convection oven have doors that are inter-connected so they operate
simultaneously by means of a chain and turnbuckle assembly. The doors are properly
adjusted and inspected before the oven leaves the factory. However, from time to time it
may become necessary to readjust the doors after usage. If you find it necessary to adjust
the doors for proper operation, the chain and turnbuckle assembly is located behind
the panel that is over the doors. It is best to adjust turnbuckles while the door is in an
unlatched position.
1. Loosen the jam nut on both turnbuckles.
2. Make adjustments simultaneously to both turnbuckles.
3. Loosening or tightening the assembly will not allow the doors to work properly. Ideally,
you should loosen one turnbuckle and tighten the other. Some experimentation will
indicate which direction you will want to make your adjustments.
4. Once the doors are operating properly, re - tighten the jam nuts so the unit stay in
adjustment. Test the door to make certain it is in adjustment.
5. Replace cover.
Gas Fired Deep Depth
Convection Oven s
A Professional Line of Commercial Cooking Equipment