Culina UBTCC90, Руководство пользователя

Страница: 21 / 27

19
Installing the appliance
o
Cut a hole in the worktop that corresponds with the drawing
shown above.
o
IMPORTANT: You must
observe the ventilation
requirements shown in the
drawing opposite.
o
The air intake vent can be at the
rear wall or in the base area.
There is no need for venting at
the front of the hob.
o
If the hob is installed above
drawers or a cupboard then a
separator board must be
placed no less than 1 cm below
the hob with at least a
2 cm gap at the rear.
o
If the hob is installed above drawers or a
cupboard there is no need for a separate air
intake.
2.5c