Culina UBTCC90, Руководство пользователя

Страница: 12 / 27

10
6. Cooking zone selection buttons
7. Zone timer activated/timer LED
8. Zone temperature display
9. Timer
10. Minus button
11. Plus button
12. Zone power level slider control button
13. Power level LED
Before first use
IMPORTANT: You should clean the ceramic hob surface.
Please see the “Cleaning and maintenance” section.
o
You should switch on one cooking zone at a time, for 5 minutes at
the maximum setting. This will help to eliminate any new smell
that exists and evaporate any humidity that has formed on the
heating elements during transit.
o
Do not burn off more than one zone at once.
o
You must place a saucepan filled half full with cold water on each
zone as you burn it off.
Touch controls
o
All operations are performed by means of the touch controls that
can be found on the control panel.
o
Each touch control has a visual display that corresponds to it.
Switching the hob top on and off
o
By pressing the power button (1) for 3 seconds then the appliance
is switched on,the LED (1) will be on.
o
Pressing the zone selection button twice in quick succession will
turn the corresponding heating zone off. If it is the only active
heating zone, the whole hob will be turned off as well
Using the ceramic hob