Culina ICONCER60RF, Инструкция по эксплуатации

Страница: 24 / 29

24
Appendix...
Installation
Hob installation
> Cut a hole in the worktop of the size shown in the diagram. The worktop
should be at least 30 mm thick and made of a heat-resistant material.
Seal cut edge of the worktop with silicone or PVA.
> P lace the hob into the cut out and push down firmly.
Electrical connection
Caution
The ceramic hob must be installed by a
the appliance yourself. The ceramic hob must
not be installed above refrigerators, freezers,
washing machines or tumble dryers. The wall
and the area above the hob should be able to
withstand heat.
Caution
• The cord should not be extended or folded
into coil during operation.
• Adapters, multi-socket strips and
extension leads must not be used.
•
Caution
Before connecting to the power supply, check:
• The voltage meets requirements.
• The appliance uses an individual socket and
does not share one with another electric
appliance. A dedicated power protection
wiring in accordance with the wiring rules.