Culina ICONCER60RF, Инструкция по эксплуатации

Страница: 15 / 29

15
Speed Level of
the Hood Combined Power Output of the Hob
Speed 1 This speed will be selected when there are no more than two
cooking zones in use, and the combined output is 8 or less. For
example, zone 1 is on 2, and zone 2 is on 5
Speed 3 This speed will be selected when there are no more than three
cooking zones in use, and the combined output is between 9
and 24. For example, zone 1 is on 7, zone 2 is on 6 and zone 3
is on 9.
Speed 5
This speed will be selected when all four cooking zones are in use,
and the combined output is between 25 and 35. For example, zone
1 is on 7, zone 2 is on 7, zone 3 is on 9 and zone 4 is on 9.
Speed P
This speed will be selected when all four cooking zones are in use,
and the combined output is greater than 35. For example, zone 1 is
on 9, zone 2 is on 9, zone 3 is on 9 and zone 4 is on 9
.
Note: Speed 2 and Speed 4 on the hood are not available when using this function.
If the hood controls are manually overridden when the hob and hood are linked, the hood will
operate for fi ve minutes on this manual setting before returning to control by the hob.
To reconnect the hood and hob immediately, press the Timer and Light together
Stopping the connectivity function
1.Simultaneously press the "-" key and the "+" key on the hob, the
indicator light will go out and
the link will be dropped. To reconnect again,
press the connectivity key on the hob again.
2.If the hob is switched off, the hood will continue to operate independen-
tly in timer mode and the current speed will flash.
The current speed level of the hood will continue for 5 minutes and step
down for 2 minutes at each level until finally switching off.