Culina DOV720AR, Руководство пользователя

Страница: 19 / 40

19
In
more
detail...
GB
IE
DOV720AR Double oven
Operation
Semi-automatic setting
(set the time of automatic starting and ending)
A. Setting the required time frame for baking (10 hours maximum)
• Press the function button repeatedly until the square symbol above “ ”,
and set the required time using the + and - buttons.
• Switch on the oven immediately, the square symbol above “ ” begins to
flash.
• When the baking is done the square symbol above “ ” will flash, and the
alarm will sound. To cancel the alarm press any button.
B. Setting the end time of baking (23 hours 59 minutes maximum)
• Press the function button repeatedly until the square symbol above “ ”
flashes, and set the end time of baking using the + and - buttons.
• Switch on the oven immediately, the square symbol above “ ” begins to
flash.
• When it reaches the time set, baking procedure will switch off automatically.
The square symbol above “ ” flashes, and the alarm will sound. To cancel
the alarm press any button.
The set baking procedure could be seen by pressing any function button
repeatedly at any time, only if the time frame of baking is at “ 0” position. By
adjusting the end time of baking to the current time, the set baking procedure can
be cancelled.
Timer
• The longest time frame can be set is 23 hours and 59 minutes. For setting
time, press the function button repeatedly until the square symbol above “
” flashes, and press “ + or - button until the desired time shows on the display.
After setting, the required time (hours and minutes) the square symbol above
the “ ” begins to flash. In addition, the time countdown begins to work.
When it reaches the set time, the square symbol above the “ ” flashes, and
the alarm sounds. To cancel the alarm press any button.
Note!
Once a function has been selected, setting the time needs to
be started within 5 seconds. If the power fails unexpectedly all
programmes and the set time will be cancelled.
Once power has been restored “12:00” and the square symbol above
“
” will show on the display. You will need to reset the time and any
programmes required.