Cuizimate RBSKDG15BK, Инструкция по эксплуатации

Страница: 20 / 24

WARM button will illuminate.
The water will continue to be kept
warm after heating.
After boiling:
Press the KEEP WARM button as
soon as the signal tone sounds at
the end of the boiling process.
The appliance will automatically
select the temperature to which you
have heated the water as the
keep-warm temperature.
The digits on DISPLAY PANEL of
the relevant temperature, the KEEP
WARM button will illuminate. The
water will be kept warm.
Dry-run protection
A dry-run protection safeguards the
appliance from damage. The protection
switches on automatically if no
more liquid is in the kettle.
The dry-run protection should only
be used as a safety device. It is not
intended to be part of the normal
operating procedure for the appliance.
If the dry-run protection has been
activated:
1.Disconnect the power plug from
the socket.
2.Allow the kettle to cool off.
Then, you can fill the kettle with
water again and use it as usual.
Cleaning
HAZARD
-The base, kettle and power cable
must not be immersed in water or
other liquids. Electrical shock hazard!
-Remove the plug from the socket
before cleaning the appliance.
-Allow the appliance to cool off
completely before cleaning it. Burn
hazard!
CAUTION
Do not open the lid during boiling
and pouring. Risk of scalding from
hot water vapour!
1.Remove the plug from the socket and
allow the kettle to cool off completely.
Wipe the outside of the kettle clean
with a slightly damp cloth.
2.Clean the base with a dry cloth.
3. Open the lid and remove the
sieve that is fastened in front of
the spout. For this, press the sieve
down slightly and then fold it off.
The sieve prevents limescale
deposits and dirt particles from
being poured out.
4.Rinse the sieve under running
water or clean it using a damp cloth.
5.Reinsert the sieve into its holder
in front of the spout. Ensure that it
locks in securely.
Cleaning and care
18