Cuizimate RBSKDG15BK, Инструкция по эксплуатации

Страница: 18 / 24

Boiling water
HAZARD
-The kettle becomes hot during use.
Burn hazard! Only hold the handle.
-Hot water vapour escapes during
heating and boiling. Scalding risk
if touched!
-Close the lid prior to switching the
appliance on. Otherwise, the appliance
cannot switch off automatically
and the hot water can overboil.
1.Remove the kettle from the base
for filling.
2.Press the locking button for the
lid (covered) in order to open the
lid. Flip the lid up.
If you push the lid back slightly, it
will lock in lightly and will not shut
again unintentionally.
3.Fill the required quantity of fresh,
cold water. Pay attention to the fill
level display: The water level must
be between MIN and MAX.
4.Close the lid again. Ensure that
the lid audibly locks in.
5.Place the kettle on the base.
6.Press the ON/OFF button , if you
only intend to boil the water (100 °C).
Or set a temperature:
-Press the SET TEMP button
repeatedly until the appropriate
temperature digits on DISPLAY
PANEL illuminates in the operating
panel. 40, 50, 60, 70, 80, 90 or 100 °C
are available to select from.
-Press the ON/OFF button within
10 seconds.
The selected temperature digits on
DISPLAY PANEL will flash.
If the boiling procedure is not started
within 10 seconds, the set temperature
will be lost and the procedure must
be repeated.
The boiling procedure is started
and the water will be heated to the
set temperature.
As soon as the selected temperature
is reached:
-a signal tone sounds,
-the relevant temperature digits on
DISPLAY PANEL illuminates for
another approx. 2 minutes,
7.Remove the kettle from the base.
Only hold the kettle on the handle
and wait a moment, until the water
is no longer bubbling.
8.Pour the water out slowly. Do not
open the lid for this.
Please note:
•If you have set e.g. 100 °C as the
required temperature, the temperature
digits on DISPLAY PANEL for
40,50,60,70,80,90 and 100 °C will
illuminate consecutively during
the boiling procedure, as soon as
the relevant water temperature has
been reached.
•You can stop the boiling procedure
at any time by pressing the ON/
OFF button.
16