Cuizimate RBSKDG15BK, Инструкция по эксплуатации

Страница: 17 / 24

Injury hazards from other causes
•Do not allow the power cable to
hang over the edge of the table top
or work surface. You could become
caught on it or children could pull
the appliance down with it.
Caution – property damage
•Place the appliance on a sturdy,
level surface. When doing so, make
sure the appliance is not located
near sources of heat e.g. hot plates,
heating pipes etc. The power cable
must lie securely in the cable recess
of the base, so that the based stands
securely.
•Position the appliance so that hot
water vapour will be ventilated
away from other objects. Do not
position the kettle beneath a hanging
cabinet or shelf and turn the spout
away from sensitive surfaces or
wallpaper. Also maintain a distance
to easily flammable materials, e.g.
curtain or table cloth.
•There are feet on the underside of
the base. As the furniture/floor surfaces
are made of diverse materials and
are treated with diverse care products,
it cannot be entirely ruled out that
some of these materials contain
components, which could attack
and soften the appliance feet. If
necessary, place a non-slip underlay
under the base.
•Do not clean the kettle with hard,
scratching or abrasive detergents,
steel wool, or similar.
Scope of delivery
•Kettle with base.
•Operating instructions with guarantee.
Unpacking and setup
1.Remove the kettle from the packaging
and carefully remove all packaging
material.
2.Check the kettle and base for
possible transport damage.
3.Unwind the power cable from the
cable winder. This is on the underside
of the base.
4.Lead the cable through one of the
cable recesses.
5.Place the base on an even and stable
surface. This surface should be
easy to clean, brightly lit and easily
accessible.
6.Place the kettle on the base.
7.Insert the power plug into a socket
with protective contacts.
Initial use
1.Clean the kettle by filling with
water up the MAX mark and boiling
it (see next section).
2.Pour the water away for hygiene
reasons.
3.Repeat the procedure 2x.
Operating Instruction
15