Cuizimate RBSESPRESSO, Инструкция по эксплуатации, Страница: 15 / 23

14
To ensure the first cup of coffee
tastes excellent, you should rinse
the coffee maker with warm water
as follows:
1.Pour water into water tank, the
water level should not exceed the
“MAX” mark in the tank. Then
close the water tank cover.
Note: the appliance is supplied with
a detachable tank for easy cleaning,
you can fill the tank with water
firstly, and then put the tank into
the appliance.
2.Set steel mesh into metal funnel
(no coffee in steel mesh),make sure
the tube on the funnel aligns with
groove in the appliance, then insert
the funnel into the appliance from
the Insert position, and fix them
into coffee maker firmly by turning
it anticlockwise until it is at the
lock position (See fig. 1).
3.Place an espresso cup on
removable cup shelf. Make sure
the coffee/steam knob is on the
“ ” position.
Note: the appliance is not equipped
with jug, please use your own jug
or cup.
4.Connect appliance into power
source, press down the ON/OFF
button to the lower position which
is the “ ” position. The red
indicator will be illuminated.
5.The appliance begins to be
pre-heated until the green
indicator is illuminated, it shows
the pre-heating is finished. Turn
the coffee/steam knob to the “ ”
position, and water will flow out.
6.After about one minute, turn the
coffee/steam knob to the “ ”
position to stop brewing, you can
pour the water in container out then
clean them thoroughly, now you
can start brewing.
Note: There may be noise when
pumping the water on the first time,
it is normal, the appliance is releasing
the air in the appliance. After about
20s, the noise will disappear.
PRE-HEATING
To make a cup of good hot
Espresso coffee, we recommend
you preheating the appliance
before making coffee, including
the funnel, steel mesh and cup, so
Operating Instruction