Cuisinart Veloce EM1000U, Руководство пользователя

Страница: 38 / 75

38
4 .6 Preparing Latte, Cappuccino and hot milk
The milk system must be connected in order to dispense drinks with milk. More
information can be found in Chapter 2 .2 Connecting the milk system .
You can prepare both “Latte” and “Cappuccino” with your appliance. These differ
primarily in the mode of preparation.
When “Latte” is prepared, the frothed milk is output first into a tall glass and the
coffee is added subsequently.
The reverse is the case when “Cappuccino” is prepared, first of all the coffee is poured
into the cup, followed by the hot milk froth on top of the coffee.
NOTE
Dispense hot water into the cups to heat them.
It is possible to use soya or rice milk but good frothing results are not possible with
these products.
The milk type of milk used can influence the milk froth quality.
Place one or two cups/mugs under the coffee dispensing unit (4).
NOTE
If using tall glasses, first pull the drip tray (7) out of the appliance so that the taller
Latte glasses can fit under the coffee outlet.
In order to reduce heat loss and splashing, adjust the dispensing spout height to
suit your cup/glass size by moving it up or down.
NOTE
If the height adjuster is difficult to move, clean it. Proceed as described in section
6 .6 Removing and cleaning the coffee dispensing unit .