5
ASSEMBLY
INSTRUCTIONS
Raise Mixer Head –
Pull up the head-lift
release lever and raise the stand mixer
head until it locks into place.
To Attach Splashguard –
Before attaching
an accessory, raise stand mixer head and
push the splashguard onto the rim above
the accessory power port until it fully snaps
into place.
To remove:
Raise the stand mixer head
and slide shield off rim.
Place Bowl on Base –
Turn clockwise to
secure.
Attach Accessory –
Place flat mixing
paddle, chef’s whisk or dough hook
into the accessory power port. Turn
counterclockwise until it locks. Turn
clockwise to remove.
Lower Mixer Head –
Pull up head-lift lever
again and fully lower the mixer head.
Note:
You do not need to remove
splashguard to change accessories.
10
3
5
7
8
9
11
12
13
6
5a
4
4a
2
14
1